水性厚板浆印不厚怎么办？
1、选择浆料很重要、厚板浆有PU厚板浆，有普通厚板浆
2、网板一定要晒厚的网板，或把网板的四个角垫高起来
厚板浆调配比例
① 厚板浆（透明）+0.5%PTF增稠剂(华樾)印厚些
② 盖面：厚板浆（白）(80%)+厚板浆（透明）(20%)+0.5%PTF增稠剂(华樾)，印3次
③ 红色厚板：厚板浆（白）(20%)+厚板浆（透明）(80%)+A014大红（劳安）+0.5%PTF增稠剂(华樾)，印3次
工艺流程
1. 丝网选用80-100目厚板，用丝印硬方刀75度刮印, 以厚板浆（透明）打底2-3次
2. 将厚板浆（白），厚板浆（透明），高温色浆搅拌匀印2-3次
3. 24-48小时自然干燥，或150-180度焙烘1-3分钟
Product name
Waterborne thick plate pulp (glossy)
Packing
25KG/drum for white, 20KG/drum for clear
Storage
6 months in cool place
Application
Suitable for cotton, polyester etc
Features
1. High elasticity
2. High fastness
3. SGS detecting passed, no PVC, no heavy metal, no NPEOs
Mix proportion
1 Waterborne thick plate pulp（Clear）+0.5% PTF Thickener（HY Chemical） printing thickness
2 cover: Waterborne thick plate pulp（White） (80%) + Waterborne thick plate pulp（Clear） (20%) + 0.5% PTF Thickener（HY Chemical）, printed 3 times
3 red: Waterborne thick plate pulp（White） (20%) + Waterborne thick plate pulp（Clear） (80%) + Pigment Red A014(Laoan Chemical)+ 0.5% PTF Thickener（HY Chemical）, printed 3 times
Printing process
1. Printing with Waterborne thick plate pulp（Clear） for 2-3 times
2. Mixing with Waterborne thick plate pulp（White）, Waterborne thick plate pulp（Clear）, pigment and stirring them evenly.
3. Printing again for 3-4 times (3-4 scrapes per time).
4. Drying it in room temperature, or baking for 1-3 minutes under 150-180℃
5. Finish.